https://JOBS.DEBBIESSTAFFING.COM/ en-us Debbie's Staffing has a great opportunity with our client in  

Rural Hall, NC!  

This High Reach Driver/Cherry Picker position is a 2nd Shift position that works a 

schedule from 3:00pm – 11:00pm.  

Starting pay is $19.00/hour. Weekly pay! Direct Deposit! 

Job Summary 
This incumbent performs a variety of duties that contribute to overall Fulfillment Center 
results. This position relies heavily on the operation of material handling equipment 
(pallet jack, forklift, high reach, cherry picker, etc) as needed to perform multiple 
warehouse job functions. 

Duties and Responsibilities include, but are not limited to: 

• Operate material handling equipment to move product within the warehouse 
• Check-in inbound cases and label accordingly 
• Perform various receiving functions, such as unloading trailers, receive and locate 
product and supplies using the DTC receiving system  
• Responsible for pulling stock cases from the warehouse storage area for the catalog 
and retail picking areas 
• Perform all tasks to ensure a safe work environment. Follow all safety procedures  
• Inspect all power equipment and complete the safety inspection sheet before 
operation 
• Stack empty pallets; clean and sweep work area and remove trash regularly 
• Work as a team member by interacting and communicating with fellow associates in a 
cooperative, constructive manner 
• Overtime may be required 
• Perform other duties assigned 

Applications:  
To apply online, visit www.debbiesstaffing.com and select the Winston-Salem 
Industrial branch office. Once registered, please call the office at 336-776-1717. 

EOE

]]> Thu, 04 Jun 2026 00:00:00 EDT 0 Debbie's Staffing has a great opportunity with our client in  

Rural Hall, NC!  
 

This Material Handler position is a 2nd Shift position that works a Sunday,Monday and Thursday schedule from 5:00pm- 3:00am.  

Starting pay is $17.00/hour. Weekly pay! Direct Deposit! 

Job Summary 

Will sort, scan and stock products 

Duties and Responsibilities include, but are not limited to: 

• Scan the product 

• Sort the product 

• Will perform material handling functions as needed to support the operation.. 

• Perform all tasks to ensure a safe work environment. Follow all safety procedures 

• Must be able to work overtime as required. 

• Stack empty pallets; clean and sweep work area and remove trash regularly. 

• Perform other duties assigned. 

Applications:  

To apply online, visit www.debbiesstaffing.com and select the Winston-Salem 

Industrial branch office. Once registered, please call the office at 336-776-1717. 
 

EOE

]]> Thu, 04 Jun 2026 00:00:00 EDT 0 2nd Shift Standup Forklift Driver

 

Debbie's Staffing is looking for a 2nd Shift Standup Forklift Driver for our client located in Winston-Salem, NC.

 

Hours: 3:00pm â€“ 11:30pm Monday- Friday (Overtime as requested by Client)

 

Pay rate: $17.60 per hour, Weekly Pay! 

 

 

Please apply online at www.debbiesstaffing.com and select the Winston Salem Industrial office.  Once registered, please call the office at 336-776-1717.

 

 

JOB SUMMARY: The Standup Forklift Driver Responsible for operating a stand-up forklift to move, store, and retrieve materials throughout the warehouse. Duties include loading and unloading trucks, transporting pallets, picking orders, using RF scanners to track inventory, and maintaining a safe and organized work area. This role requires attention to detail, adherence to safety procedures, and the ability to perform general warehouse tasks as needed.

Job Responsibilities:

• Operating a stand-up reach truck or forklift to move pallets and materials. 
• Loading and unloading trucks. 
• Pulling orders and putting products away in warehouse racks. 
• Using RF scanners or warehouse systems to track inventory. 
• Staging materials for shipping and production. 
• Performing daily equipment safety checks. 
• Keeping the warehouse clean and organized. 
• Lifting boxes or cases (often up to 45–50 lbs) when needed.

 

Requirements

•  Must have minimum if 6 months experience operating a stand-up forklift within the last 2 years.
•  Sit down forklift experience is a plus
• Ability to work safely in a fast-paced warehouse environment 
• Strong attention to detail and accuracy 
• Ability to work independently and as part of a team 
• Able to stand, walk, and move throughout the shift 
• Willingness to perform general warehouse duties as needed 
• Commitment to following all safety procedures and company policies
• Flexibility to work overtime when needed and able to pass all new hire screenings
• Must follow PPE policy. (Steal toes shoes is a must)

EOE

 

 

 

]]> Wed, 03 Jun 2026 00:00:00 EDT 0 1St Shift Standup Forklift Driver

 

Debbie's Staffing is looking for a 1st Shift Standup Forklift Driver for our client located in Winston-Salem, NC.

 

Hours: 6:30am â€“ 3:00pm Monday-Friday (Overtime as requested by Client)

 

Pay rate: $17.60 per hour, Weekly Pay! 

 

 

Please apply online at www.debbiesstaffing.com and select the Winston Salem Industrial office.  Once registered, please call the office at 336-776-1717.

 

 

JOB SUMMARY: The Standup Forklift Driver Responsible for operating a stand-up forklift to move, store, and retrieve materials throughout the warehouse. Duties include loading and unloading trucks, transporting pallets, picking orders, using RF scanners to track inventory, and maintaining a safe and organized work area. This role requires attention to detail, adherence to safety procedures, and the ability to perform general warehouse tasks as needed.

Job Responsibilities:

• Operating a stand-up reach truck or forklift to move pallets and materials. 
• Loading and unloading trucks. 
• Pulling orders and putting products away in warehouse racks. 
• Using RF scanners or warehouse systems to track inventory. 
• Staging materials for shipping and production. 
• Performing daily equipment safety checks. 
• Keeping the warehouse clean and organized. 
• Lifting boxes or cases (often up to 45–50 lbs) when needed.

 

Requirements

•  Must have a minimum of 6 months experience operating a stand-up forklift within the last 2 years
•  Sit down forklift experience is a plus
• Ability to work safely in a fast-paced warehouse environment 
• Strong attention to detail and accuracy 
• Ability to work independently and as part of a team 
• Able to stand, walk, and move throughout the shift 
• Willingness to perform general warehouse duties as needed 
• Commitment to following all safety procedures and company policies
• Flexibility to work overtime when needed and able to pass all new hire screenings
• Must follow PPE policy. (Steal toes shoes is a must)

EOE

 

 

 

]]> Wed, 03 Jun 2026 00:00:00 EDT 0 3rd Shift Assembly Technician  

 

Debbie's Staffing is looking for a 3rd Shift Assembly Technician for our client located in Kernersville, NC.

 

Hours: 10:00pm-6:00pm Sunday-Thursday (overtime will be mandatory) Must be able to train on 1st or 2nd shift for 1 month, then transition to 3rd shift hours.

 

Pay rate: $17.50 per hour, Weekly Pay! Temp-to-Hire!

 

 

Please apply online at www.debbiesstaffing.com and select the Winston Salem Industrial office.  Once registered, please call the office at 336-776-1717.

 

JOB SUMMARY: Will be performing advanced and precision assembly of industrial products in accordance with established specifications, blueprints, and work instructions. This role includes conducting high-accuracy calibration, balancing, and testing using precision measuring instruments, as well as performing installation, repair, reassembly, and adjustments of components. The technician will handle materials, maintain inventory, operate material-handling equipment, and ensure compliance with all safety, PPE, and ESD protocols. This position requires physical stamina, attention to detail, and the ability to work efficiently both independently and as part of a team.

 

Job Description:

• Perform complex and advanced product assembly following specifications and instructions.
• Complete high-precision calibration, testing, and adjustments using specialized instruments.
• Monitor equipment functionality and report issues or substandard conditions to the supervisor.
• Install, repair, inspect, reassemble, replace, refit, and adjust products as needed.
• Order, stock, and organize materials to prevent shortages.
• Receive, unload, unpack, and distribute materials to designated workstations.
• Read and interpret blueprints to accurately assemble products.
• Inventory and track parts, tools, and components used in production.
• Assemble industrial fans according to work orders and maintain low scrap rates.
• Balance and test fans and motors for proper performance.
• Operate precision measurement equipment.
• Safely operate a forklift and pallet jack.
• Maintain a clean, safe, and organized work area.
• Perform other duties as assigned.

 

REQUIREMENTS:

• Excellent attendance
• Must be able to work in a non-climate-controlled facility
• Ability to stand on concrete for the entire shift.
• Ability to lift, bend, stoop, and walk throughout the production floor.
• Capacity to lift and move products weighing 50–70 lbs.
• Flexibility to work overtime when needed.
• Ability to work independently and as part of a team.
• Strong attention to detail with the ability to stay focused for long periods.
• Must be able to pass all new hire screenings

 

EEO

#HP123

]]> Mon, 01 Jun 2026 00:00:00 EDT 0 3rd Shift Assembly Technician  

 

Debbie's Staffing is looking for a 3rd Shift Mechanical Assembly Technician for our client located in Kernersville, NC.

 

Hours: 10:00pm-6:00pm Sunday-Thursday (overtime will be mandatory) Must be able to train on 1st or 2nd shift for 1 month, then transition to 3rd shift hours.

 

Pay rate: $17.50 per hour, Weekly Pay! Temp-to-Hire!

 

 

Please apply online at www.debbiesstaffing.com and select the Winston Salem Industrial office.  Once registered, please call the office at 336-776-1717.

 

JOB SUMMARY: Will be performing advanced and precision assembly of industrial products in accordance with established specifications, blueprints, and work instructions. This role includes conducting high-accuracy calibration, balancing, and testing using precision measuring instruments, as well as performing installation, repair, reassembly, and adjustments of components. The technician will handle materials, maintain inventory, operate material-handling equipment, and ensure compliance with all safety, PPE, and ESD protocols. This position requires physical stamina, attention to detail, and the ability to work efficiently both independently and as part of a team.

 

Job Description:

• Perform complex and advanced product assembly following specifications and instructions.
• Complete high-precision calibration, testing, and adjustments using specialized instruments.
• Monitor equipment functionality and report issues or substandard conditions to the supervisor.
• Install, repair, inspect, reassemble, replace, refit, and adjust products as needed.
• Order, stock, and organize materials to prevent shortages.
• Receive, unload, unpack, and distribute materials to designated workstations.
• Read and interpret blueprints to accurately assemble products.
• Inventory and track parts, tools, and components used in production.
• Assemble industrial fans according to work orders and maintain low scrap rates.
• Balance and test fans and motors for proper performance.
• Operate precision measurement equipment.
• Safely operate a forklift and pallet jack.
• Maintain a clean, safe, and organized work area.
• Perform other duties as assigned.

 

REQUIREMENTS:

• Excellent attendance
• Must be able to work in a non-climate-controlled facility
• Ability to stand on concrete for the entire shift.
• Ability to lift, bend, stoop, and walk throughout the production floor.
• Capacity to lift and move products weighing 50–70 lbs.
• Flexibility to work overtime when needed.
• Ability to work independently and as part of a team.
• Strong attention to detail with the ability to stay focused for long periods.
• Must be able to pass all new hire screenings

 

EEO

#HP123

]]> Mon, 01 Jun 2026 00:00:00 EDT 0 1st Shift Assembly Technician  

 

Debbie's Staffing is looking for a 1st Shift Mechanical Assembly Technician for our client located in Kernersville, NC.

 

Hours: 6:00am- 2:00pm Monday-Friday (Overtime as requested by company).

 

Pay rate: $17.00 per hour, Weekly Pay! Temp-To-Hire Assignment!

 

 

Please apply online at www.debbiesstaffing.com and select the Winston Salem Industrial office.  Once registered, please call the office at 336-776-1717.

 

JOB SUMMARY: Will be performing advanced and precision assembly of industrial products in accordance with established specifications, blueprints, and work instructions. This role includes conducting high-accuracy calibration, balancing, and testing using precision measuring instruments, as well as performing installation, repair, reassembly, and adjustments of components. The technician will handle materials, maintain inventory, operate material-handling equipment, and ensure compliance with all safety, PPE, and ESD protocols. This position requires physical stamina, attention to detail, and the ability to work efficiently both independently and as part of a team.

 

Job Description:

• Perform complex and advanced product assembly following specifications and instructions.
• Complete high-precision calibration, testing, and adjustments using specialized instruments.
• Monitor equipment functionality and report issues or substandard conditions to the supervisor.
• Install, repair, inspect, reassemble, replace, refit, and adjust products as needed.
• Order, stock, and organize materials to prevent shortages.
• Receive, unload, unpack, and distribute materials to designated workstations.
• Read and interpret blueprints to accurately assemble products.
• Inventory and track parts, tools, and components used in production.
• Assemble industrial fans according to work orders and maintain low scrap rates.
• Balance and test fans and motors for proper performance.
• Operate precision measurement equipment.
• Safely operate a forklift and pallet jack.
• Maintain a clean, safe, and organized work area.
• Perform other duties as assigned.

 

REQUIREMENTS:

• Excellent attendance
• Must be able to work in a non-climate-controlled facility
• Ability to stand on concrete for the entire shift.
• Ability to lift, bend, stoop, and walk throughout the production floor.
• Capacity to lift and move products weighing 50–70 lbs.
• Flexibility to work overtime when needed.
• Ability to work independently and as part of a team.
• Strong attention to detail with the ability to stay focused for long periods.
• Must be able to pass all new hire screenings

 

EEO

#HP123

]]> Mon, 01 Jun 2026 00:00:00 EDT 0 2nd Shift Assembly Technician  

 

Debbie's Staffing is looking for a 2nd Shift Mechanical Assembly Technician for our client located in Kernersville, NC.

 

Hours: 2:00pm-10:00pm Monday-Friday (overtime as requested)

 

Pay rate: $17.50 per hour, Weekly Pay! Temp-to-Hire!

 

 

Please apply online at www.debbiesstaffing.com and select the Winston Salem Industrial office.  Once registered, please call the office at 336-776-1717.

 

JOB SUMMARY: Will be performing advanced and precision assembly of industrial products in accordance with established specifications, blueprints, and work instructions. This role includes conducting high-accuracy calibration, balancing, and testing using precision measuring instruments, as well as performing installation, repair, reassembly, and adjustments of components. The technician will handle materials, maintain inventory, operate material-handling equipment, and ensure compliance with all safety, PPE, and ESD protocols. This position requires physical stamina, attention to detail, and the ability to work efficiently both independently and as part of a team.

 

Job Description:

• Perform complex and advanced product assembly following specifications and instructions.
• Complete high-precision calibration, testing, and adjustments using specialized instruments.
• Monitor equipment functionality and report issues or substandard conditions to the supervisor.
• Install, repair, inspect, reassemble, replace, refit, and adjust products as needed.
• Order, stock, and organize materials to prevent shortages.
• Receive, unload, unpack, and distribute materials to designated workstations.
• Read and interpret blueprints to accurately assemble products.
• Inventory and track parts, tools, and components used in production.
• Assemble industrial fans according to work orders and maintain low scrap rates.
• Balance and test fans and motors for proper performance.
• Operate precision measurement equipment.
• Safely operate a forklift and pallet jack.
• Maintain a clean, safe, and organized work area.
• Perform other duties as assigned.

 

REQUIREMENTS:

• Excellent attendance
• Must be able to work in a non-climate-controlled facility
• Ability to stand on concrete for the entire shift.
• Ability to lift, bend, stoop, and walk throughout the production floor.
• Capacity to lift and move products weighing 50–70 lbs.
• Flexibility to work overtime when needed.
• Ability to work independently and as part of a team.
• Strong attention to detail with the ability to stay focused for long periods.
• Must be able to pass all new hire screenings

 

EEO

#HP123

]]> Mon, 01 Jun 2026 00:00:00 EDT 0 3rd Shift Assembly Technician  

 

Debbie's Staffing is looking for a 3rd Shift Mechanical Assembly Technician for our client located in Kernersville, NC.

 

Hours: 10:00pm-6:00pm Sunday-Thursday (overtime will be mandatory) Must be able to train on 1st or 2nd shift for 1 month, then transition to 3rd shift hours.

 

Pay rate: $17.50 per hour, Weekly Pay! Temp-to-Hire!

 

 

Please apply online at www.debbiesstaffing.com and select the Winston Salem Industrial office.  Once registered, please call the office at 336-776-1717.

 

JOB SUMMARY: Will be performing advanced and precision assembly of industrial products in accordance with established specifications, blueprints, and work instructions. This role includes conducting high-accuracy calibration, balancing, and testing using precision measuring instruments, as well as performing installation, repair, reassembly, and adjustments of components. The technician will handle materials, maintain inventory, operate material-handling equipment, and ensure compliance with all safety, PPE, and ESD protocols. This position requires physical stamina, attention to detail, and the ability to work efficiently both independently and as part of a team.

 

Job Description:

• Perform complex and advanced product assembly following specifications and instructions.
• Complete high-precision calibration, testing, and adjustments using specialized instruments.
• Monitor equipment functionality and report issues or substandard conditions to the supervisor.
• Install, repair, inspect, reassemble, replace, refit, and adjust products as needed.
• Order, stock, and organize materials to prevent shortages.
• Receive, unload, unpack, and distribute materials to designated workstations.
• Read and interpret blueprints to accurately assemble products.
• Inventory and track parts, tools, and components used in production.
• Assemble industrial fans according to work orders and maintain low scrap rates.
• Balance and test fans and motors for proper performance.
• Operate precision measurement equipment.
• Safely operate a forklift and pallet jack.
• Maintain a clean, safe, and organized work area.
• Perform other duties as assigned.

 

REQUIREMENTS:

• Excellent attendance
• Must be able to work in a non-climate-controlled facility
• Ability to stand on concrete for the entire shift.
• Ability to lift, bend, stoop, and walk throughout the production floor.
• Capacity to lift and move products weighing 50–70 lbs.
• Flexibility to work overtime when needed.
• Ability to work independently and as part of a team.
• Strong attention to detail with the ability to stay focused for long periods.
• Must be able to pass all new hire screenings

 

EEO

#HP123

]]> Mon, 01 Jun 2026 00:00:00 EDT 0 3rd Shift TB Blending Attendant 

Debbie's Staffing is looking for Material Handler / Forklift Operator for our client located in Winston-Salem, NC.    

 

Hours: 3rd Shift Monday - Wednesday 7:00pm-7:00am and Thursday 5:00pm-11:00pm Overtime as requested by client.

 

Pay rate: $18.60 per hour, Weekly Pay, Long Term Assignment!

 

Please apply online at www.debbiesstaffing.com and select the Winston Salem Industrial office.  Once registered, please give our office a call at 336-776-1717.

JOB SUMMARY: Loading and Unloading trucks, movement of material, use of forklift /standup rider.  Understanding of documentation; fill out incoming tobacco bug count and cleaning documentation.

• Using hoist, pour product into feeders.
• Scan materials.
• Ensure the material is on the floor and ready to be used.
• Pick up material from staging area by the dock.
• Equipment:  Forklift
• Division of time:  up to 11.5hrs daily on equipment, prepping materials, cleaning work area, breaking down used boxes.
• Weekly washing on start up or shut down.
• PPE:  gloves, safety glasses, earplugs, and steel toe shoes.

 

REQUIREMENTS:

• Ability to climb, push, pull, drag, and walk the entire shift.
• Dusty/Smoking Environment
• Must be able to pass all new hire screenings.
• Must be ok working in a non-climate control building.
• Must be able to work in other areas as assigned.

 

 

EOE

 

]]> Sat, 30 May 2026 00:00:00 EDT 0 Debbie's Staffing is seeking a 1st shift Forklift Driver in High Point, NC.

This is a long-term temp assignment with the potential for full time hire.

Hours: 1st shift Monday-Friday 8:00am-5:00pm Monday-Friday

Pay: $15-$17.00 per hour!! Weekly pay!!

TO START THE HIRING PROCESS: Please register online at www.debbiesstaffing.com. When you finish registering, please call our Greensboro office at #336-333-6365.

 

JOB SUMMARY:

· Safely use powered industrial trucks and other machinery to efficiently transport materials    

· Unloading, sorting, scanning, and reloading pallets using forklifts or pallet jacks

· Maintain good housekeeping

· Able to work independently

· Conduct daily safety check off sheets on material handling equipment: recharge batteries 

 

REQUIREMENTS:

(2-3 years’ experience on a sit down Forklift is required)

RF Scanner experience is a plus

· Good communication skills

· Ability to follow instructions.

· Demonstrate regular and punctual attendance

· Respectful of others

· Team player

 

EOE

 

]]> Thu, 21 May 2026 00:00:00 EDT 0 Debbie’s Staffing is now recruiting for a Quality Assurance Technician in Greensboro, NC!

Schedule: 2nd: 3pm-11pm (Must be flexible to work overtime including weekends)

Pay: $ 17.00 per hour. Weekly Pay! Must have resume!!

Job Summary:

 The Quality Assurance Technician is responsible for ensuring manufactured cigarette filter products meet established quality standards and customer specifications. This role supports production by conducting inspections, documenting results, and identifying quality issues in a fast-paced manufacturing environment. Prior quality experience in manufacturing is strongly preferred.

Key responsibilities:

• Perform routine in-process and final inspections of cigarette filter products
• Ensure products meet quality standards, specifications, and compliance requirements
• Document inspection results accurately and maintain quality records
• Identify defects, non-conformances, and trends; escalate issues as needed
• Communicating quality concerns clearly with production and leadership teams
• Follow Good Manufacturing Practices (GMPs), safety regulations, and company policies
• Support continuous improvement initiatives related to quality and process control
• Maintain a clean and organized work area

Position Qualifications:

• Previous Quality Assurance or Quality Control experience in a manufacturing environment preferred
• Experience working in regulated or high-volume production settings is a plus
• Strong attention to detail and ability to follow written procedures
• Basic computer skills for documentation and reporting
• Ability to work independently and as part of a team
• Willingness to work assigned shift (2nd or 3rd shift)
• Must have steel toe shoes
• Ability to stand, walk, and perform repetitive inspections throughout the shift

 

To apply, please register online at www.debbiestaffing.com and select Greensboro, NC as the branch location. Call 336-333-6365 for the next step.

EEO

]]> Mon, 18 May 2026 00:00:00 EDT 0 3rd Shift Utility Production Associate

 

Debbie's Staffing is looking for a 3rd Shift Utility Production Associate for our client located in Kernersville, NC.

 

Hours: 10:00pm â€“ 6:00am Sunday - Thursday (Overtime as requested by Client)

 

Pay rate: $18.50 per hour, Weekly Pay! Temp-to-Hire!

 

 

Please apply online at www.debbiesstaffing.com and select the Winston Salem Industrial office.  Once registered, please call the office at 336-776-1717.

 

 

JOB SUMMARY: The Utility Production Associate ensures finished assembled products are properly organized, palletized, securely strapped, and moved to designated staging areas for final review by the warehouse team. This role also provides support to the assembly team during high-volume periods or as needed.

 

Job Responsibilities:

• Receive finished products at the end of the assembly line and organize them onto pallets by product type or order.
• Securely strap products to pallets using proper tools and techniques to ensure safe transport.
• Move strapped pallets to designated staging areas for inspection and processing by warehouse or shipping teams.
• Ensure pallets are properly tagged or identified according to procedure.
• Maintain a clean and orderly workspace, including end-of-line and staging areas.
• Coordinate with warehouse personnel to ensure smooth product flow and handoffs.
• Assist assembly team with tasks as needed.
• Follow standard operating procedures (SOPs) and safety guidelines during assembly or product handling.
• Use hand tools and basic equipment as needed.
• Perform other duties as assigned.

 

Requirements

• Excellent attendance
• Experience with pallet strapping tools and manual pallet jacks (or willingness to learn).
• Ability to stand on concrete for the entire shift.
• Ability to lift (50–70 lbs.), bend, stoop, and walk throughout the production floor.
• Flexibility to work overtime when needed and able to pass all new hire screenings

EOE

#HP123

 

 

]]> Wed, 13 May 2026 00:00:00 EDT 0 3rd Shift CNC Material Handler 

 

Debbie's Staffing is looking for a 3rd Shift CNC Material Handler for our client located in Kernersville, NC.

 

Hours: 10:00pm – 6:00am Sunday - Thursday (Weekends depending on production)

 

Pay rate: $18.50 per hour, Weekly Pay! Temp-to-hire!

 

 

Please apply online at www.debbiesstaffing.com and select the Winston Salem Industrial office. Once registered, we will review your application, resume, and work experience. If you meet the requirements and skills for the position, one of our representatives will contact you to schedule an interview.

 

 

JOB SUMMARY: The CNC Material Handler supports CNC production operations by staging, delivering, and removing materials and finished parts. This role ensures CNC machines and operators have the correct materials at the right time to maintain production flow.  Forklift or powered industrial truck experience.

Job Responsibilities

• Deliver raw materials, components, and tooling to CNC machines per production schedule
• Remove finished parts and transfer them to designated inspection, assembly, or storage areas
• Stage materials accurately using pick lists, work orders, or production travelers
• Load and unload materials using forklifts, pallet jacks, carts, or hoists
• Track material movement and maintain accurate inventory counts
• Verify part numbers, quantities, and material specifications
• Support CNC operators by ensuring machines remain supplied and areas stay organized
• Perform basic material inspections for damage or defects
• Maintain a clean, safe, and organized work environment (5S standards)
• Complete required documentation and follow safety procedures
• Perform other duties as assigned

 

 

Requirements

• Excellent attendance
• Must be able to work in a non-climate-controlled facility
• Ability to stand on concrete for the entire shift.
• Ability to lift (50–70 lbs.), bend, stoop, and walk throughout the production floor.
• Flexibility to work overtime when needed.
• Must be able to pass all new hire screenings

EOE

#HP123

]]> Wed, 13 May 2026 00:00:00 EDT 0 3rd Shift Utility Production Associate

 

Debbie's Staffing is looking for a 3rd Shift Utility Production Associate for our client located in Kernersville, NC.

 

Hours: 10:00pm â€“ 6:00am Sunday - Thursday (Overtime as requested by Client)

 

Pay rate: $18.50 per hour, Weekly Pay! Temp-to-Hire!

 

 

Please apply online at www.debbiesstaffing.com and select the Winston Salem Industrial office.  Once registered, please call the office at 336-776-1717.

 

 

JOB SUMMARY: The Utility Production Associate ensures finished assembled products are properly organized, palletized, securely strapped, and moved to designated staging areas for final review by the warehouse team. This role also provides support to the assembly team during high-volume periods or as needed.

 

Job Responsibilities:

• Receive finished products at the end of the assembly line and organize them onto pallets by product type or order.
• Securely strap products to pallets using proper tools and techniques to ensure safe transport.
• Move strapped pallets to designated staging areas for inspection and processing by warehouse or shipping teams.
• Ensure pallets are properly tagged or identified according to procedure.
• Maintain a clean and orderly workspace, including end-of-line and staging areas.
• Coordinate with warehouse personnel to ensure smooth product flow and handoffs.
• Assist assembly team with tasks as needed.
• Follow standard operating procedures (SOPs) and safety guidelines during assembly or product handling.
• Use hand tools and basic equipment as needed.
• Perform other duties as assigned.

 

Requirements

• Excellent attendance
• Experience with pallet strapping tools and manual pallet jacks (or willingness to learn).
• Ability to stand on concrete for the entire shift.
• Ability to lift (50–70 lbs.), bend, stoop, and walk throughout the production floor.
• Flexibility to work overtime when needed and able to pass all new hire screenings

EOE

#HP123

 

 

]]> Wed, 13 May 2026 00:00:00 EDT 0 2nd Shift Utility Production Associate

 

Debbie's Staffing is looking for a 2nd Shift Utility Production Associate for our client located in Kernersville, NC.

 

Hours: 2:00pm- 10:00pm Monday-Friday (Overtime as requested by Client)

 

Pay rate: $18.50 per hour, Weekly Pay! Temp-to-Hire!

 

 

Please apply online at www.debbiesstaffing.com and select the Winston Salem Industrial office.  Once registered, please call the office at 336-776-1717.

 

 

JOB SUMMARY: The Utility Production Associate ensures finished assembled products are properly organized, palletized, securely strapped, and moved to designated staging areas for final review by the warehouse team. This role also provides support to the assembly team during high-volume periods or as needed.

 

Job Responsibilities:

• Receive finished products at the end of the assembly line and organize them onto pallets by product type or order.
• Securely strap products to pallets using proper tools and techniques to ensure safe transport.
• Move strapped pallets to designated staging areas for inspection and processing by warehouse or shipping teams.
• Ensure pallets are properly tagged or identified according to procedure.
• Maintain a clean and orderly workspace, including end-of-line and staging areas.
• Coordinate with warehouse personnel to ensure smooth product flow and handoffs.
• Assist assembly team with tasks as needed.
• Follow standard operating procedures (SOPs) and safety guidelines during assembly or product handling.
• Use hand tools and basic equipment as needed.
• Perform other duties as assigned.

 

Requirements

• Excellent attendance
• Experience with pallet strapping tools and manual pallet jacks (or willingness to learn).
• Ability to stand on concrete for the entire shift.
• Ability to lift (50–70 lbs.), bend, stoop, and walk throughout the production floor.
• Flexibility to work overtime when needed and able to pass all new hire screenings

EOE

#HP123

 

 

]]> Wed, 13 May 2026 00:00:00 EDT 0 2nd Shift Assembly Technician  

 

Debbie's Staffing is looking for a 2nd Shift Assembly Technician for our client located in Kernersville, NC.

 

Hours: 2:00pm-10:00pm Monday-Friday (overtime as requested)

 

Pay rate: $17.50 per hour, Weekly Pay! Temp-to-Hire!

 

 

Please apply online at www.debbiesstaffing.com and select the Winston Salem Industrial office.  Once registered, please call the office at 336-776-1717.

 

JOB SUMMARY: Will be performing advanced and precision assembly of industrial products in accordance with established specifications, blueprints, and work instructions. This role includes conducting high-accuracy calibration, balancing, and testing using precision measuring instruments, as well as performing installation, repair, reassembly, and adjustments of components. The technician will handle materials, maintain inventory, operate material-handling equipment, and ensure compliance with all safety, PPE, and ESD protocols. This position requires physical stamina, attention to detail, and the ability to work efficiently both independently and as part of a team.

 

Job Description:

• Perform complex and advanced product assembly following specifications and instructions.
• Complete high-precision calibration, testing, and adjustments using specialized instruments.
• Monitor equipment functionality and report issues or substandard conditions to the supervisor.
• Install, repair, inspect, reassemble, replace, refit, and adjust products as needed.
• Order, stock, and organize materials to prevent shortages.
• Receive, unload, unpack, and distribute materials to designated workstations.
• Read and interpret blueprints to accurately assemble products.
• Inventory and track parts, tools, and components used in production.
• Assemble industrial fans according to work orders and maintain low scrap rates.
• Balance and test fans and motors for proper performance.
• Operate precision measurement equipment.
• Safely operate a forklift and pallet jack.
• Maintain a clean, safe, and organized work area.
• Perform other duties as assigned.

 

REQUIREMENTS:

• Excellent attendance
• Must be able to work in a non-climate-controlled facility
• Ability to stand on concrete for the entire shift.
• Ability to lift, bend, stoop, and walk throughout the production floor.
• Capacity to lift and move products weighing 50–70 lbs.
• Flexibility to work overtime when needed.
• Ability to work independently and as part of a team.
• Strong attention to detail with the ability to stay focused for long periods.
• Must be able to pass all new hire screenings

 

EEO

#HP123

]]> Wed, 13 May 2026 00:00:00 EDT 0 Fri, 24 Apr 2026 00:00:00 EDT 0 Debbie's Staffing has a great opportunity with our client in  Rural Hall, NC!  

 

This High Reach Driver/Cherry Picker position is a 2nd Shift position that works a schedule from 5:00pm â€“ 3:00am.  

 

Starting pay is $19.00/hour. Weekly pay! Direct Deposit! 

 

Job Summary 

 

This incumbent performs a variety of duties that contribute to overall Fulfillment Center results. This position relies heavily on the operation of material handling equipment (pallet jack, forklift, high reach, cherry picker, etc) as needed to perform multiple warehouse job functions. 

 

Duties and Responsibilities include, but are not limited to: 

 

• Operate material handling equipment to move product within the warehouse 
• Check-in inbound cases and label accordingly 
• Perform various receiving functions, such as unloading trailers, receive and locate product and supplies using the DTC receiving system  
• Responsible for pulling stock cases from the warehouse storage area for the catalog and retail picking areas 
• Perform all tasks to ensure a safe work environment. Follow all safety procedures  • Inspect all power equipment and complete the safety inspection sheet before operation 
• Stack empty pallets; clean and sweep work area and remove trash regularly 
• Work as a team member by interacting and communicating with fellow associates in a cooperative, constructive manner • Overtime may be required 
• Perform other duties assigned 

 

Applications:  

 

To apply online, visit www.debbiesstaffing.com and select the Winston-Salem Industrial branch office. Once registered, please call the office at 336-776-1717. 

 

 

EOE 

]]> Fri, 13 Mar 2026 00:00:00 EDT 0